eSeasongear VB80 8 Alarm Vibration Watch Instructions

eSeasongear VB80 8 Alarm Vibration Watch Instructions

- Warning: eSeasongear VB80 watch is NOT IP67 waterproof, DON'T wear the watch in the shower!

- Extra strong longer vibrating time Alarm 1 for wake up alarm.

- The vibration can be stopped manually by pushing any button.


How to set Time and Alarms

- Video Instruction on YouTube: Please search for "VB80 Watch"

https://www.youtube.com/watch?v=jXXyUX3rPM4 Basic operations





****************************************************************************

Charging: Remove the watch from its silicon strap, charge the watch using the USB cable provided for 1 hour or overnight.

To check vibration, press a button while the watch is charging.

Please re-install the watch back to the watch strap before programing, the two watch buttons should be under the silicon buttons as shown in the picture.

Press Button = Short press button one time

Long Press Button = Press and hold button for 3 seconds.

****************************************************************************

How to Check Time and Alarms:

When display is black, press Right button once for Time

When display is black, press Right button twice (or 5 times for newer model) for Battery Percentage

When display is black, press Left button once for Alarm 1 on/off

When display is black, press Left button twice for Alarm 1 time

When display is black, press Left button 3 times for Alarm 2 on/off:

When display is black, press Left button 4 times for Alarm 2 time:

When display is black, press Left button 5-16 times for Alarm 3 to 8 (repeat above)

****************************************************************************

How to Set Time

- When display is black, press Right button once for time, before the display returns to black, long press Right button again until only hours show, press any button to change the hours; long press Right button again until only minutes show, press any button to change the minutes; long press Right button again until 12 -- or 24-- show, press any button to change the 12/24 hrs setting, long press Right button again until time shown, the Time is set.

****************************************************************************

How to Set Alarms

- When display is black, press Left button once for Alarm 1 status, press Right button to change (A1 ON or A1 OF); OF = (Off).

- When display is black, press Left button twice for Alarm 1 time, before display returns to black, long press Left button again until only hours show, press any button to change the hours, long press Left button again until only minutes show, press any button to change the minutes.

- When display is black, press Left button 3 times for Alarm 2 status, press Right button to change (A2 ON or A2 OF).

- When display is black, press Left button 4 times for Alarm 2 time, long press Left button again until hours show, press any button to change, long press Left button again until minutes show, press any button to change.

- When display is black, press Left button 5 to 16 times for Alarm 3 to Alarm 8, repeat above.

****************************************************************************

How to check vibration function:

- When watch is charging, press any button, the watch should vibrate.

- or Turn Alarm 1 on , check Alarm 1 time (8:08 is the default time), set watch time one minutes before Alarm 1 time, wait for the vibration.

****************************************************************************

How to check battery percentage:

- Press the right button 3 times.