HANNA BL 981411 BlackStone pH mini controller 0.0-14.0

HANNA Instruments Mini Controllers

HANNA BL 981411 BlackStone pH mini controller 0.0-14.0, BL981411

BL 981411 pH controller has been designed for easy, affordable installation in tight spaces, ideal for simple and effective process control. The unit is provided with differential pH input and can be used with any pH electrode with standard BNC connector. Measurements are clearly displayed on the large LCD, while the status LED indicates operating mode.

BL 981411 is also provided with a dosing relay. Selecting acid dosing, will cause the relay to activate when the measurement is higher than the setpoint. If the basic dosing is selected, the relay is activated when the reading falls below the setpoint.

Setpoint adjustment (from 0 to 14 pH) and calibration procedures are easily performed with trimmers on the front panel. You can also choose from automatic or manual dosing modes with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits you to enable or disable the dosing relay according to your need. An overtime control system advises you when the relay is active too long, to help prevent overdosing.

Two models are available, with power supply input at 115/230 Vac or 12 Vdc.

(HANNA Instruments BL981411, BL 981411, BL981411-0, BL 981411-0, BL981411-1, BL 981411-1, HI 981411)